Response Electronics CL6011B Specifications Page 76
- Page / 170
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
4-46 Input and Output Cards
UM4.6:CS6003 Original — December 1991
Note
For cards with momentary output, hold down the
CHK MOM switch long enough to ensure card has
time to respond. If the card has switches S1
through S8, closure times are user- adjustable.
For these cards the indicators on the card and the
MUX DO/DI indicators on the calibrator stay on for
0.1 to 25.5 seconds, as determined by the
individual channel switch settings. The closure
time is equal to the sum of the activated switch
times. Individual switch times are silkscreened on
the card next to the switch positions.
Step 9: Press each of the eight calibrator switches labeled MUX
DO/DI OR CONTROLLER DI so the indicators on switches 1,
3, 5, and 7 go out and the indicators on switches 2, 4, 6, and
8 light.
Step 10: Press the calibrator CHK MOM switch. On the discrete output
card, indicators DS2, DS4, DS6, and DS8 should light. On the
calibrator, MUX DO/DI indicators 2, 4, 6, and 8 should light.
Discrete output card indicators DS1, 3, 5, and 7, and MUX
DO/DI indicators 1, 3, 5, and 7 should go out. If any of the
indicators listed fail to light, or if any of the other indicators on
the discrete output card or calibrator remain lit, then the
discrete output card requires repair.
Note
For cards with momentary output, hold down the
CHK MOM switch long enough to ensure card has
time to respond. If the card has switches S1
through S8, closure times are user-adjustable. For
these cards the indicators on the card and the
MUX DO/DI indicators on the calibrator stay on for
0.1 to 25.5 seconds, as determined by the
individual channel switch settings. The closure
time is equal to the sum of the activated switch
times. Individual switch times are silkscreened on
the card next to the switch positions.
Step 11: Press MUX DO/DI OR CONTROLLER DI switches 2, 4, 6,
and 8 again to switch them off.
4
- Using and Maintaining the 1
- Type CS6003 Calibrator 1
- Documentation Map 3
- Appendixes 8
- Contents 10
- Original — December 1991 10
- UM4.6:CS6003 10
- Section Tab Guide 11
- 1 Introduction 13
- 1.5 Related Documents 14
- 1.6 Manual Conventions 15
- 1-4 Introduction 16
- 2 Using the Calibrator 17
- 2.2.1 Cables 18
- 2.2.2 Front Panel 18
- Using the Calibrator 19
- 2.2.2.7 Breakout Terminals 20
- 2.2.2.11 Numerical Display 20
- 2.2.2.12 Family Switches 21
- 2.2.2.13 Group Mode Switches 21
- 2.2.2.14 CHK MOM Switch 21
- 2.2.2.15 CARD IDENT Switch 21
- 2.2.2.16 Mode Switches 21
- 2.2.2.17 Status Indicator 22
- 2.2.2.18 Data Switches 22
- 2.3 Operating the Calibrator 23
- 2.3.4.1 Lamp Test 24
- 2.3.4.2 Procedures 24
- ± 0.1% ± 1 count 25
- ± 0.002 Vdc 25
- ± 0.0005 mV 25
- ± 0.005 ohms 26
- ± 0.01 ohms 26
- 3 Card Removal, Cleaning, and 27
- Installation 27
- 3.3 Circuit Card Cleaning 28
- 3.4 Corrosion 29
- 4 Input and Output Card 31
- 4.1.1.2 Equipment Required 32
- 4.1.1.3 Calibration Procedure 32
- Input and Output Card 33
- (Isolated) 34
- X00606–A 35
- 4.1.3.1 Overview 39
- 4-10 Input and Output Card 40
- Figure 4-3. RTD Input Card 40
- R2, and R3 for the RTD card 40
- 4.1.3.2 Equipment Required 41
- 4.1.3.3 Calibration Procedure 41
- 1. Zero adjustment 43
- 2. Span adjustment 43
- 4.1.4.1 Overview 44
- 4-15Input and Output Cards 45
- 4.1.4.2 Equipment Required 46
- 4.1.4.3 Calibration Procedure 46
- Input Cards 48
- 4.1.5.1 Overview 49
- 4.1.5.2 Equipment Required 49
- 4.1.5.3 Calibration Procedure 50
- 4.1.6.1 Overview 50
- 4.1.6.2 Equipment Required 51
- 4.1.7.1 Overview 54
- 4.1.7.2 Equipment Required 54
- 4.1.7.3 Calibration Procedure 54
- Input and Output Cards 56
- X00613–A 57
- 4.1.8.2 Overview 60
- 4.1.8.3 Equipment Required 60
- 4.1.8.4 Calibration Procedure 60
- Current Output Cards 61
- 4.2.1.2 Equipment Required 62
- 4.2.1.3 Calibration Procedure 62
- 1. 0=OFF; 1=ON 64
- X00616–A 65
- REMOVE W1 FOR 65
- MOMENTARY OPTION 65
- 4.2.3.2 External Relay Panel 74
- 4.2.3.3 Switch Settings 74
- 4.2.3.4 Overview 74
- 4.2.3.5 Equipment Required 74
- 4.2.3.6 Calibration Procedure 75
- 4-48 Input and Output Cards 78
- 5 Controller Cards 79
- 5.1.1 MPU Card 80
- 5.1.2 Process I/O Card 83
- 5.2.1 MPU Card 85
- 5.2.1.2 Calibration Procedure 86
- 5.2.2 Process I/O Card 88
- 5.2.2.2 Calibration Procedure 89
- 5.3.1 Equipment Required 92
- 5.3.2 Calibration Procedure 92
- 5.4.1 Equipment Required 94
- 5.4.2 Calibration Procedure 95
- 5.5.1 Equipment Required 97
- 5.5.2 Calibration Procedure 97
- (with Dual Current Output) 99
- 5.6.2 Calibration Procedure 100
- ± 0.01 volts dc 101
- ± 0.02 volts dc. If not, the 101
- Manual Control Cards 102
- 5.7.2 Calibration Procedure 103
- 5.8.1 Equipment Required 104
- Conversion Card 105
- 5.9.2 Calibration Procedure 106
- Controller Cards 107
- ± 0.015 volts dc. If 108
- 5.10.1 Equipment Required 110
- 5.10.2 Calibration Procedure 110
- 5.10.3 Functional Test 111
- ± 0.08 volts 112
- 5.11.1 Equipment Required 114
- 5.11.2 Calibration Procedure 114
- 6 Data Highway Cards 115
- 6.1.2 Calibration Procedure 116
- ± 0.050 volts 117
- ± 0.002 volts dc 117
- ± 0.005 volts dc. If not 117
- Devices)(PN41B0985) 118
- 6.2.2 Calibration Procedure 119
- ± 0.010 volts 120
- ± 0.050 volts dc on the 120
- Appendix A 121
- Maintaining the Calibrator 121
- A.3 Lamp Test 122
- A.4 Fan and Filter 122
- Glossary 123
- DM6461, DM6462, DM6463, Using 159
- Document by Number 159
- UM4.6:CS6003, 1-1 159
- Reader’s Evaluation 167
- 1712 CENTRE CREEK DR 168
- AUSTIN TX 78754–9971 168
Suunto X6OG manuels
Manuels d'utilisation et guides de l'utilisateur pour Horloge Suunto X6OG.
Nous fournissons des manuels en pdf 1 Suunto X6OG à télécharger gratuitement par type de document : Manuel de l'utilisateur
Suunto X6OG Manuel de l'utilisateur (64 pages)
marque: Suunto | Catégorie: Clock | Taille: 2.33 MB |
Table des matières
Plus de produits et de manuels pour Horloge Suunto
| Modèles | Type de document |
|---|---|
| S6-SL |
Manuel de l'utilisateur
SUUNTO S6-SL User Manual,
72 pages
|
| Ambit2 |
Manuel de l'utilisateur
Инструкция по эксплуатации SUUNTO Ambit2,
167 pages
|
| G9-3 |
Manuel de l'utilisateur
SUUNTO G9-3 User Manual,
82 pages
|
© 2020, manymanuals.com. All rights reserved. | 0.033 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals